First, we need to know the finished opening size for your door...
we will then show you the door models available in that size.
Commercial Coiling Roll-Up Doors
)
MODEL 502
Recommended for light commercial applications, where a chain hoist is not required.
Includes an enclosed drum assembly with high cycle steel bearings rotating around a stationary shaft. The EZ-Tension Device provides safe ratcheting of the spring tension.
Mounting brackets attach to guides for quick tilt-up of entire assembly, which allows for complete door installation within 5 minutes. Installation video link: http://www.youtube.com/watch?v=62sfrPV1kL0
- 26 gauge steel
- Continuous corrugated curtain of hot dipped galvanized steel.
- 22 colors: siliconized polyester paint finishes with 20 year warranty against chalking and fading.
-
Optional factory installed electric opener (right mount is standard, inside looking out, but left mount is available upon special request.)
NOTE ~ 2 week production time, plus transit time from Atlanta, Houston, Orlando or Phoenix (customer pick-ups available upon request).
In order to see pricing information, you must enter your door size above. Enter Door Size
)
MODEL 536
This model is designed for commercial applications where light gauge steel is acceptable. Chain hoist option is available.
The drum contains high cycle sealed bearings, which provide effortless raising or lowering of the door.
- 26 gauge steel
- Continuous corrugated curtain of hot dipped galvanized steel.
- 22 colors: siliconized polyester paint finishes with 20 year warranty against chalking and fading.
- OPTIONAL: electric opener or chain hoist (left mount is standard, inside looking out)
NOTE ~ 2 week production time, plus transit time from Atlanta, Houston, Orlando or Phoenix (customer pick-ups available upon request).
In order to see pricing information, you must enter your door size above. Enter Door Size
)
MODEL 652
Recommended for high wind areas and most hurricane zones.
Featuring the newest technology in wind rated roll-up doors: nylon wind locks, which are clips attached along edges on each side of the door. In the event of high winds, the wind locks will catch on to a wind lock bar in the vertical guides, which will prevent the wind from blowing the door in. The unique design of the nylon wind locks create a smoother, quieter operation than steel wind-locks.
- 26 gauge steel
- Continuous corrugated curtain of hot dipped galvanized steel.
- 22 colors: siliconized polyester paint finishes with 20 year warranty against chalking and fading.
- High cycle steel bearings on all drums.
- Springs are engineered for 80,000 up & down cycles.
- Roll formed 16 gauge guides and structural steel mounting brackets.
- OPTIONAL: electric opener or chain hoist (left mount is standard, inside looking out)
NOTE ~ 2 week production time, plus transit time from Atlanta, Houston, Orlando or Phoenix (customer pick-ups available upon request).
In order to see pricing information, you must enter your door size above. Enter Door Size
)
Janus model # MD15 / MD16
Recommended for light industrial applications when a slatted curtain is desired over a corrugated curtain.
Easy installation procedures. The slats are factory installed on to the barrel. A spring tension device provides simple tension adjustment.
Slats are replaceable if damage occurs to the curtain. Slats are available in flat or curved profiles.
- 24 gauge steel slats, hot dipped galvanized (colors optional)
- Barrel assembly is enclosed with galvanized steel.
- Roll-formed galvanized steel guides with wear guards, both sides
- Chain hoist is optional on all sizes (left mount, inside looking out)
NOTE ~ 2 week production time, plus transit time from Atlanta, Houston or Orlando (customer pick-ups available upon request).
In order to see pricing information, you must enter your door size above. Enter Door Size
